CALL US Toll Free: 1-800-350-2142

Home           Products/Tech Info           About       Contact   

TPO

TPO membranes for single-ply roof systems

Take a Look

TPO Bonding Adhesive is a high-strength, solvent-based contact adhesive that allows bonding of TPO membrane to various porous and non-porous

TPO Bonding Adhesive

TPO Bonding Adhesive is a high-strength, solvent-based contact adhesive that allows bonding of TPO membrane to various porous and non-porous substrates.

 

DATA SHEET

TPO Coated Metal is a 24-gauge (0.6 mm) galvanized steel sheet that is coated with a layer of .035” non-reinforced TPO flashing

TPO Coated Metal

TPO Coated Metal is a 24-gauge (0.6 mm) galvanized steel sheet that is coated with a layer of .035” non-reinforced TPO flashing. TPO membrane may be welded directly to the coated metal, eliminating the need to strip in the metal with a separate piece of TPO Pressure-Sensitive Cover strip.

 

DATA SHEET

TPO Clear Cut-Edge Sealant is a free flowing, translucent polymeric material designed for sealing cut edges (exposed fabric) of SealTite TPO

TPO Clear Cut-Edge Sealant

TPO Clear Cut-Edge Sealant is a free flowing, translucent polymeric material designed for sealing cut edges (exposed fabric) of SealTite TPO Reinforced Membrane.

 

DATA SHEET

TPO FB Substrate Adhesive is a single-component, cold-applied rubberized asphalt emulsion adhesive.

TPO FB Substrate Adhesive

TPO FB Substrate Adhesive is a single-component, cold-applied rubberized asphalt emulsion adhesive designed specifically to adhere TPO thermoplastic roof membranes to a variety of compatible substrates.

 

DATA SHEET

a high-strength solvent-based contact adhesive that allows bonding of TPO membrane to various porous and non-porous substrates.

TPO Low VOC Bonding Adhesive

TPO Low VOC Bonding Adhesive is a high-strength solvent-based contact adhesive that allows bonding of TPO membrane to various porous and non-porous substrates.

 

DATA SHEET

60 mil thermoplastic polyolefin membrane used for inside/outside corners, field fabricated pipe flashings, sealant pockets and scuppers.

TPO Non-Reinforced Flashing/Detailing Membrane

TPO non-reinforced flashing/detailing membrane is a 60 mil thermoplastic polyolefin membrane used for inside/outside corners, field fabricated pipe flashings, sealant pockets and scuppers.

 

DATA SHEET

TPO Outside corners are pre-molded and are used for flashing outside corners on a variety of details.

TPO Outside corners

TPO Outside corners are pre-molded and are used for flashing outside corners on a variety of details. Installation is fast and easy with no cutting or stretching required. TPO Outside Corners are used for flashing outside corners on a variety of details.

 

DATA SHEET

TPO T-Joint Covers are used to seal step-offs at splice intersections.

TPO T-Joint Covers

TPO T-Joint Covers are used to seal step-offs at splice intersections. Installation is mandatory on all 60-, 72- and 80-mil TPO systems and on 45-mil systems where step-offs have not been properly sealed.

 

DATA SHEET

TPO Heat-Weldable Walkway Roll is designed to protect the TPO membrane in those areas exposed to repetitive foot traffic and other hazards.

TPO Walkway Roll

The Viking Products Group TPO Heat-Weldable Walkway Roll is designed to protect the TPO membrane in those areas exposed to repetitive foot traffic and other hazards.

 

DATA SHEET

Weathered Membrane Cleaner is used to clean both new and in-service EPDM membranes and TPO membranes prior to the welding process.

Weathered Membrane Cleaner

Weathered Membrane Cleaner is used to clean both new and in-service EPDM membranes and TPO membranes prior to the welding process. It helps to loosen and remove dirt and other contaminants from the surface of the EPDM and TPO membranes and leaves a suitable surface for welding or the subsequent application of Single-Ply Primer Splice Wash.

DATA SHEET

Flex FB Low Rise Adhesive is a two component, low rise polyurethane adhesive designed to attach Flex Fleeceback Roofing Membranes.

Flex FB Low Rise Adhesive

Flex FB Low Rise Adhesive is a two component, low rise polyurethane adhesive designed to attach Flex Fleeceback Roofing Membranes to a variety of approved substrates in accordance with current Flex Roof Details and Specifications.

DATA SHEET

Flex Thermoplastic One-Part Pourable Sealer is a one-part, moisture curing, elastomeric polyether sealant.

Flex Thermoplastic Pourable Sealer

Flex Thermoplastic One-Part Pourable Sealer is a one-part, moisture curing, elastomeric polyether sealant providing rapid skin time when exposed to atmospheric moisture forming a waterproof rubber surface in less than an hour.

DATA SHEET

Flex TPO 6 inch Pressure-Sensitive Securement Strip is a nominal 0.045” (1.14mm) thick reinforced TPO membrane strip

Flex TPO 6” Pressure-Sensitive Securement Strip

Flex TPO 6 inch Pressure-Sensitive Securement Strip is a nominal 0.045” (1.14mm) thick reinforced TPO membrane strip with a nominal 0.035” (0.89mm) thick, fully cured synthetic rubber pressure sensitive adhesive laminated along one edge.

DATA SHEET

Flex TPO 10” Pressure-Sensitive Securement Strip

Flex TPO 10” PS Securement Strip is used in place of half width sheets to secure membrane in the perimeter area of the roof. The use of this product allows field membrane to be utilized over the entire roof area.

DATA SHEET

The Flex TPO Molded Pipe Seal is an injection molded, pre-formed flashing for pipes 1” to 6” in diameter.

Flex TPO Molded Pipe Seal

The Flex TPO Molded Pipe Seal is an injection molded, pre-formed flashing for pipes 1” to 6” in diameter. Pipe Seals are packaged in boxes of eight and come with universal clamping rings.

DATA SHEET

The Flex TPO Molded Sealant Pocket consists of an interlocking, two-piece, injection molded flexible pocket

Flex TPO Molded Sealant Pocket

The Flex TPO Molded Sealant Pocket consists of an interlocking, two-piece, injection molded flexible pocket with a rigid polypropylene vertical wall and pre-formed deck flanges.

DATA SHEET

The Flex 6” TPO Trim Strip is specifically designed to be used as a strip-in membrane for FlexClad TPO Metal ends and joints

6” Trim Strip TPO Flashing Membranes

The Flex 6” TPO Trim Strip is specifically designed to be used as a strip-in membrane for FlexClad TPO Metal ends and joints, Flex TPO FB Roofing Reinforced Membrane end joint details or for patch installations.

DATA SHEET

The Flex 6” TPO Trim Strip is specifically designed to be used as a strip-in membrane for FlexClad TPO Metal ends and joints

Flex TPO Pressure Sensitive PS Coverstrip

Flex TPO PS Coverstrip is a .030” thick non-reinforced TPO flashing membrane laminated to a .030” thick cured synthetic rubber pressure sensitive adhesive intended to strip in flat metal flanges such as perimeter edge metal and prefabricated curb flanges.

DATA SHEET

Flex TPO Primer is a high solid content, clear (translucent color) polymer-base splice primer used to prepare TPO membrane for improved adhesion

Flex TPO Primer

Flex TPO Primer is a high solid content, clear (translucent color) polymer-base splice primer used to prepare TPO membrane for improved adhesion to TPO Pressure Sensitive Coverstrip to walls and vertical surfaces prior to installing Flex Self Adhering TPO Membrane.

DATA SHEET

Flex TPO Split Pipe-Boots are fabricated flashings made of 45-mil reinforced Flex TPO membrane for pipes 1-inch (25.4 mm) to 6-inches (152.4 mm)

Flex TPO Split Pipe Boots

Flex TPO Split Pipe-Boots are fabricated flashings made of 45-mil reinforced Flex TPO membrane for pipes 1-inch (25.4 mm) to 6-inches (152.4 mm) in diameter.

DATA SHEET

Flex TPO Square Tube Wraps are fabricated using 45 mil reinforced Flex TPO membrane.

Flex TPO Square Tube Wrap

Flex TPO Square Tube Wraps are fabricated using 45 mil reinforced Flex TPO membrane. A split and overlap tab are incorporated into these parts to allow the flashings to be opened and wrapped around a square penetration with an obstruction. Manufactured in four sizes: 3”x3”, 4”x4”, 5”x5” and 6”x6”.

DATA SHEET

Flex TPO Square Tube Wraps are fabricated using 45 mil reinforced Flex TPO membrane.

FLEX 45 MIL TPO PLUS ROOF MEMBRANE

The Flex 45 TPO Plus polyester reinforced thermoplastic polyolefin (TPO) roofing membranes are designed for use in mechanically fastened and adhered roofing systems. The Flex 45 TPO Plus membrane is manufactured in widths of 5’and 10’ for economical installations.

DATA SHEET

Flex TPO Square Tube Wraps are fabricated using 45 mil reinforced Flex TPO membrane.

FLEX 60 TPO PLUS ROOF MEMBRANE

Flex 60 TPO Plus polyester reinforced thermoplastic polyolefin (TPO) roofing membranes are designed for use in mechanically fastened and adhered roofing systems. The Flex 60 TPO Plus membrane is manufactured in widths of 5' and10'for economical installations.

DATA SHEET

Flex TPO Square Tube Wraps are fabricated using 45 mil reinforced Flex TPO membrane.

FLEX 80 TPO PLUS ROOF MEMBRANE

The Flex 80 TPO Plus polyester reinforced thermoplastic polyolefin (TPO) roofing membranes are designed for use in mechanically fastened and adhered roofing systems. The Flex 80 TPO Plus membrane is manufactured in widths of 5’and 10’ for economical installations.

DATA SHEET

TPO

 

© Copyright Viking Products Group, Inc.

Terms and Conditions