CALL US Toll Free: 1-800-350-2142

Home           Products/Tech Info           About       Contact   

PVC

PVC membranes for single-ply roof systems

Take a Look

TPO Bonding Adhesive is a high-strength, solvent-based contact adhesive that allows bonding of TPO membrane to various porous and non-porous

Weldtite 60 mil PVC Roof Membrane

The Weldtite 60 mil PVC (polyvinyl chloride) Roofing Membrane is a high-performance thermoplastic membrane designed for mechanically attached or adhered roofing applications. The Weldtite 60 mil PVC is produced with high grade polyvinyl chloride resins into a polyester reinforced roofing membrane with built in chemical, UV and fire resistance.

 

DATA SHEET

TPO Coated Metal is a 24-gauge (0.6 mm) galvanized steel sheet that is coated with a layer of .035” non-reinforced TPO flashing

Weldtite 80 mil PVC Roof Membrane

The Weldtite 80 mil PVC (polyvinyl chloride) Roofing Membrane is a high-performance thermoplastic membrane designed for mechanically attached or adhered roofing applications. The Weldtite 80 mil PVC is produced with high grade polyvinyl chloride resins into a polyester reinforced roofing membrane with built in chemical, UV and fire resistance.

 

DATA SHEET

TPO Clear Cut-Edge Sealant is a free flowing, translucent polymeric material designed for sealing cut edges (exposed fabric) of SealTite TPO

Weldtite FB 50 mil PVC Roof Membrane

The Weldtite FB 50 mil PVC (polyvinyl chloride) Roofing Membrane is a high-performance thermoplastic membrane designed for mechanically attached or adhered roofing applications. The Weldtite FB 50 mil PVC Roofing Membrane is manufactured in a thickness of 50 Mils of polyester reinforced membrane with a 5.50 oz. polyester fleece backing.

 

DATA SHEET

TPO FB Substrate Adhesive is a single-component, cold-applied rubberized asphalt emulsion adhesive.

Weldtite FB 60 mil PVC Roof Membrane

The Weldtite FB 60 mil PVC (polyvinyl chloride) Roofing Membrane is a high-performance thermoplastic membrane designed for mechanically attached or adhered roofing applications. The Weldtite FB 60 mil PVC Roofing Membrane is manufactured in a thickness of 60 Mils of polyester reinforced membrane with a 5.50 oz. polyester fleece backing.

 

DATA SHEET

a high-strength solvent-based contact adhesive that allows bonding of TPO membrane to various porous and non-porous substrates.

Weldtite FB 80 mil PVC Roof Membrane

The Weldtite FB 80 mil PVC (polyvinyl chloride) Roofing Membrane is a high-performance thermoplastic membrane designed for mechanically attached or adhered roofing applications.  The Weldtite FB 80 mil PVC Roofing Membrane is manufactured in a thickness of 80 Mils of polyester reinforced membrane with a 5.50 oz. polyester fleece backing.

 

DATA SHEET

60 mil thermoplastic polyolefin membrane used for inside/outside corners, field fabricated pipe flashings, sealant pockets and scuppers.

WeldTite Flashing

VPG WeldTite Flashing is a non-reinforced thermoplastic poly(Vinyl Chloride) based membrane used for inside/outside corners, field fabricated pipe flashings, sealant pockets and scuppers, when the use of premolded accessories are not feasible.

 

DATA SHEET

Flex FB Low Rise Adhesive is a two component, low rise polyurethane adhesive designed to attach Flex Fleeceback Roofing Membranes.

PVC 8” Stripping Edge

The PVC 8” Stripping Edge is specifically designed to be used as a strip-in membrane for PVC Clad Metal ends and joints, Weldtite Plus FB Roofing Membrane end joint details or for patch installations.

DATA SHEET

Flex Thermoplastic One-Part Pourable Sealer is a one-part, moisture curing, elastomeric polyether sealant.

PVC Coated Metal

PVC Coated Metal is a galvanized steel sheet with a laminate of non-reinforced PVC flashing. The sheet is cut into the appropriate width and used to fabricate metal drip edges or other roof perimeter edging profiles.

DATA SHEET

Flex TPO 6 inch Pressure-Sensitive Securement Strip is a nominal 0.045” (1.14mm) thick reinforced TPO membrane strip

PVC FB WB Substrate Adhesive

PVC FB WB Substrate Adhesive is a unique roofing adhesive formulation for use with cold application of the WeldTite FB System. This adhesive should be applied into a uniform thickness with a brush, squeegee or roller.

DATA SHEET

PVC Heat Weldable Walkway Rolls

PVC Heat Weldable Walkway Roll is designed to protect WeldTite membrane in those areas exposed to repetitive foot traffic and other hazards.

DATA SHEET

The Flex TPO Molded Pipe Seal is an injection molded, pre-formed flashing for pipes 1” to 6” in diameter.

PVC Inside Corners

PVC Inside Comers are pre-molded and are used for flashing the inside corners on a variety of details. Installation is fast and easy with no cutting or stretching required.

DATA SHEET

The Flex TPO Molded Sealant Pocket consists of an interlocking, two-piece, injection molded flexible pocket

PVC OUTside Corners

PVC Outside Corners are pre-molded and are used for flashing outside corners. Installation is fast and easy with no cutting or stretching required.

DATA SHEET

The Flex 6” TPO Trim Strip is specifically designed to be used as a strip-in membrane for FlexClad TPO Metal ends and joints

PVC Pipe Boot

The PVC Pipe Boot is an injection-molded, pre-formed flashing for pipes 1” (25.4 mm) to 6” (152.4 mm) in diameter. PVC Pipe Boots are packaged in boxes of eight and come with universal clamping rings.

DATA SHEET

The Flex 6” TPO Trim Strip is specifically designed to be used as a strip-in membrane for FlexClad TPO Metal ends and joints

PVC Split Pipe Seal

PVC Split Pipe Seals are fabricated flashings made of 60-mil reinforced WeldTite membrane for pipes 1-inch (25.4 mm) to 6-inches (152.4 mm) in diameter. Other color and sizes are available on a special order basis.

DATA SHEET

Flex TPO Primer is a high solid content, clear (translucent color) polymer-base splice primer used to prepare TPO membrane for improved adhesion

PVC T-Joint Cover

PVC T-Joint Covers are used to seal step-offs at splice intersections. Installation is mandatory on all 60-, and 80-mil PVC systems and on 50-mil systems where step-offs have not been properly sealed. PVC T-Joint Covers are made from 40-mil non-reinforced flashing cut into a 4.5” diameter circle

DATA SHEET

Flex TPO Split Pipe-Boots are fabricated flashings made of 45-mil reinforced Flex TPO membrane for pipes 1-inch (25.4 mm) to 6-inches (152.4 mm)

PVC WB Bonding Adhesive

PVC WB Bonding Adhesive is a water based adhesive designed specifically for the installation of fully adhered PVC and Elvaloy roof membrane systems to a variety of approved substrates, as well as vertical attachment of the membrane.

DATA SHEET

Flex TPO Square Tube Wraps are fabricated using 45 mil reinforced Flex TPO membrane.

Weldtite 50 mil PVC Roof Membrane

The Weldtite 50 mil PVC (polyvinyl chloride) Roofing Membrane is a high-performance thermoplastic membrane designed for mechanically attached or adhered roofing applications. The Weldtite 50 mil PVC is produced with high grade polyvinyl chloride resins into a polyester reinforced roofing membrane with built in chemical, UV and fire resistance.

DATA SHEET

PVC

 

© Copyright Viking Products Group, Inc.

Terms and Conditions